Texas Register, Volume 20, Number 4, Pages 175-260, January 13, 1995 Page: 233
175-260 p. ; 28 cm.View a full description of this periodical.
Extracted Text
The following text was automatically extracted from the image on this page using optical character recognition software:
FIGURE 1 30 TAC 115.116(a)(2)
A. Allowable Seal Gap (>1/8 inch wide): As (square
inches) = 1 square inch per tank diameter foot x tank diameter
B. Measured Seal Gap: Ms (square inches)
C. Reportable Seal Gap Area: Rs = Ms - As in squareinches
D. Reportable Seal Gap/Allowable Ratio: RRs = Rs
divided by As
E. Tank Circumference: Tc (feet)
F. Reportable Seal Gap Length (total linear feet of
seal gap greater than 1/8 inch gap width): R1
G. Reportable Seal Gap Length/Tank Circumference
Ratio: RR1 = Rl/Tc
H. Tank Emissions (with good single seal): Ts =AP-42 Calculation
(convert to pounds/day)
I. Tank Emissions (with two good seals): Tss =
AP-42 Calculation
(convert to pounds/day)
TABLES AND GRAPHIC January 13, 1995 20 TexReg 233
Upcoming Pages
Here’s what’s next.
Search Inside
This issue can be searched. Note: Results may vary based on the legibility of text within the document.
Tools / Downloads
Get a copy of this page or view the extracted text.
Citing and Sharing
Basic information for referencing this web page. We also provide extended guidance on usage rights, references, copying or embedding.
Reference the current page of this Periodical.
Texas. Secretary of State. Texas Register, Volume 20, Number 4, Pages 175-260, January 13, 1995, periodical, January 13, 1995; Austin, Texas. (https://texashistory.unt.edu/ark:/67531/metapth176736/m1/59/: accessed May 21, 2024), University of North Texas Libraries, The Portal to Texas History, https://texashistory.unt.edu; crediting UNT Libraries Government Documents Department.