Texas Register, Volume 28, Number 14, Pages 2821-2988, April 4, 2003 Page: 2,898
2821-2988 p. ; 28 cm.View a full description of this periodical.
Extracted Text
The following text was automatically extracted from the image on this page using optical character recognition software:
The commission proposes new 113.900, which will incorporate
by reference, without change, the final promulgated rules and
all amendments to Subpart GGGG adopted by the EPA since
April 12, 2001. The final rule for Subpart GGGG was issued on
April 12, 2001 (66 FR 19006) and amended on April 5, 2002
(67 FR 16317). This new MACT standard applies to process
components at new and existing major sources at vegetable oil
production facilities which use solvent extraction, which includes
facilities that produce crude vegetable oil and meal products by
removing oil from listed oil seeds through direct contact with an
organic solvent. The EPA identified this source category as a
major source of HAP emissions of n-hexane.
The April 5, 2002 amendments specified that the startup, shut-
down, and maintenance provisions were applicable to vegetable
oil production plants and specified the applicability of the NE-
SHAP general provisions in 40 CFR 63, Subpart A.
Section 113.910 - Wet-Formed Fiberglass Mat Production (40
CFR 63, Subpart HHHH)
The commission proposes new 113.910, which will incorpo-
rate by reference, without change, the final promulgated rules
for Subpart HHHH adopted by the EPA on April 11, 2002 (67 FR
17824). This new MACT standard applies to process compo-
nents at new and existing major sources which are in the wet-
formed fiberglass mat production source category. The primary
HAP emissions from these sources are formaldehyde, methanol,
and vinyl acetate.
Section 113.930 - Paper and Other Web Coating (40 CFR 63,
Subpart JJJJ)
The commission proposes new 113.930, which will incorporate
by reference, without change, the final promulgated rules for
Subpart JJJJ adopted by the EPA on December 4, 2002 (67
FR 72330). This new MACT standard applies to facilities that
coat paper and other web substrates. The final standards
are designed to eliminate approximately 80% of nationwide
HAP emissions from facilities that coat paper and other web
substrates. The EPA identified this source category as a major
source of HAP emissions of toluene, methanol, methyl ethyl
keytone, xylenes, phenol, methylene chloride, ethylene glycol,
glycol ethers, hexane, methyl isobutyl ketone, cresols and
cresylic acid, dimethylformamide, vinyl acetate, formaldehyde,
and ethyl benzene.
Section 113.970 - Surface Coating of Large Appliances (40 CFR
63, Subpart NNNN)
The commission proposes new 113.970, which will incorporate
by reference, without change, the final rules to Subpart NNNN
adopted by the EPA on July 23, 2002 (67 FR 48254). This new
MACT standard applies to new and existing sources that apply
surface coatings to large appliances. The EPA identified this
source category as a major source of HAP emissions of glycol
ethers, methylene diphenyl diisocyanate, methyl ethyl ketone,
toluene, and xylene. These compounds account for over 80%
of the nationwide HAP emissions from this source category.
Section 113.1020 - Surface Coating of Metal Coil (40 CFR 63,
Subpart SSSS)
The commission proposes new 113.1020, which will incor-
porate by reference, without change, the final rules and all
amendments to Subpart 88s adopted by the EPA since June
10, 2002. EPA issued the final rule for Subpart 8888 on June
10, 2002 (67 FR 39794) and technical corrections on March
17, 2003 (68 FR 12590). This new MACT standard appliesto process components at new and existing sources that coat
metal coil products. The primary HAPs that will be controlled
include methyl ethyl ketone, glycol ethers, xylenes (isomers
and mixtures), toluene, and isophorone. The March 17, 2003
amendments corrected the time line for beginning the first
semiannual reporting period and submitting the first semiannual
report.
Section 113.1030 - Leather Finishing Operations (40 CFR 63,
Subpart TTTT)
The commission proposes new 113.1030, which will incorpo-
rate by reference, without change, the final promulgated rules in
Subpart TTTT adopted by the EPA on February 27, 2002 (67 FR
9156). This new MACT standard applies to process components
at new and existing major sources at leather finishing operations.
The EPA has identified these facilities as major sources of emis-
sions of HAPs, such as glycol ethers, toluene, and xylene.
Section 113.1040- Cellulose Products Manufacturing (40 CFR
63, Subpart UUUU)
The commission proposes new 113.1040, which will incor-
porate by reference, without change, the final rules in Subpart
UUUU adopted by the EPA on June 11, 2002 (67 FR 40044).
This new MACT standard applies to process components at
cellulose products manufacturing. Cellulose products manufac-
turing includes both the miscellaneous viscose processes (MVP)
source category and the cellulose ethers production (CEP)
source category. The MVP source category comprises the
cellulose food casing, rayon, cellulosic sponge, and cellophane
manufacturing industries. The CEP source category comprises
the methyl cellulose, hydroxypropyl methyl cellulose, hydrox-
ypropyl cellulose, hydroxyethyl cellulose, and carboxymethyl
cellulose manufacturing industries. The EPA identified the MVP
source category and the CEP source category as including
major sources of emissions of HAPs, such as carbon disulfide,
carbonyl sulfide, ethylene oxide, methanol, methyl chloride,
propylene oxide, and toluene.
Section 113.1050 - Boat Manufacturing (40 CFR 63, Subpart
VVVV)
The commission proposes new 113.1050, which will incorpo-
rate by reference, without change, the final rules and all amend-
ments to Subpart VVVV adopted by the EPA since August 22,
2001. EPA issued the final rule for Subpart VVVV on August 22,
2001 (66 FR 44218) and amendments on October 3, 2001 (66
FR 50504). This new MACT standard applies to process com-
ponents at new and existing boat manufacturing facilities, which
include fiberglass resin and gel coat operations, carpet and fab-
ric adhesive operations, and aluminum recreational boat paint-
ing operations. The EPA has identified boat manufacturing as
a major source of HAPs, such as styrene, methyl methacrylate,
methylene chloride, toluene, xylene, n-hexane, methyl ethyl ke-
tone, methyl isobutyl ketone, and methyl chloroform. The Octo-
ber 3, 2001 amendments corrected typographical errors.
Section 113.1070- Rubber Tire Manufacturing (40 CFR 63, Sub-
part XXXX)
The commission proposes new 113.1070, which will incorpo-
rate by reference, without change, the final rules and all amend-
ments to Subpart XXXX adopted by the EPA since July 9, 2002.
EPA issued the final rule for Subpart XXXX on July 9, 2002 (67
FR 45588) and technical corrections on March 12, 2003 (68 FR
11745). This new MACT standard applies to process compo-
nents at new and existing rubber tire manufacturing facilities.28 TexReg 2898 April 4, 2003 Texas Register
Upcoming Pages
Here’s what’s next.
Search Inside
This issue can be searched. Note: Results may vary based on the legibility of text within the document.
Tools / Downloads
Get a copy of this page or view the extracted text.
Citing and Sharing
Basic information for referencing this web page. We also provide extended guidance on usage rights, references, copying or embedding.
Reference the current page of this Periodical.
Texas. Secretary of State. Texas Register, Volume 28, Number 14, Pages 2821-2988, April 4, 2003, periodical, April 4, 2003; Austin, Texas. (https://texashistory.unt.edu/ark:/67531/metapth101027/m1/77/: accessed May 26, 2024), University of North Texas Libraries, The Portal to Texas History, https://texashistory.unt.edu; crediting UNT Libraries Government Documents Department.