31 Matching Results

Search Results

Advanced search parameters have been applied.
in subjects: "Science and Technology - Tools"  
Results: 1 - 24 next

[Fort Bend County Courthouse addition construction, lumber and tools to the left]

Description: Photograph of Fort Bend County Courthouse addition construction, June 3, 1957. Contractor was Bell Construction. Foundation work. A man wearing light colored pants, dark shirt, gloves, and hat is walking across the new foundation. Another man to left of foundation is wearing a hardhat with light colored shirt. Partial view of man with straw hat (dark band) on far right. Man (back of) in a trench next to the new foundation on the right.
Date: June 3, 1957
Item Type: Refine your search to only Photograph
Partner: Fort Bend Museum

[Surveyor's transit]

Description: Surveyor's transit, mounts with spring-action pin to tripod (1999.012.001b). Face is engraved with cardinal directions, with a star replacing North. Two bubble levels built into face. Degrees and minutes marked around circumference of face. Dial on side changes display on face to read numbers between 1 and 16. Manufacturer: T.F. Randolph, Cincinnati, Ohio. Patent date June 24, 1879. Scope mounts to compass body with screw pins from underneath. Needle tightens by screw action on "W" side… more
Date: 1880
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum

[Strop with a wooden core]

Description: Strop with a wooden core two padded leather sides parallel to each other, one side is unpadded leather, and the fourth side is inset with a hone. One of the padded sides has a 6 cm hole exposing cotton, same side is missing three nails and is torn.
Date: 1895
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum

[Rusty Pliers]

Description: Pliers that are hinged at top and then has four textured holes, and then has parallel handles of which one ends in a clasp that hooks the two handles together. On the handle without a clasp, written on the inside, is "M KLEIN & SONS"
Date: 1895
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum

[Rusty L-shaped carpenter's square]

Description: Rusty L-shaped carpenter's square with the vertical part longer and wider than the horizontal part. The square is marked off in inches: outer edge, 24 in. horizontally and 16 in. vertically. The inside is marked 22.5 in. horizontally and 14 in. vertically. Straight down the middle of the longer part it is marked starting at 1 ending with 21in. The other side of the square is the exact same except for one marking in the corner where the two parts meet. STANLEY _… more
Date: 1885
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum

[Monkey Wrench]

Description: Starting at the bottom, the handle of the monkey wrench is a flat oval shape with two holes, it probably had two wooden pieces, one on each side attached with screws or nails. The neck has a vice that extends all the way to the head to the top of the handle. The head is rectangular with a sloping side. The back of the head is square and looks as though it was used as hammer.
Date: 1880
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum

[Hand saw with a steel blade]

Description: Hand saw with a carved wooden handle and steel blade. Handle has a carved leaf pattern on one side with three brass bolts: top two are 1.2 cm in diameter and have no surface decoration, bottom bolt is 2.2 cm in diameter and is stamped with an eagle and with "Warranted / Pat. Dec. 27, 1887 / Superior"
Date: 1890
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum

[Compass saw]

Description: Compass saw that has an upside down G-Shaped handle with two screwed where the blade inserts. The one further away from the blade is 2 cm in diameter and is stamped with H Disston & Sons Philada With a little emblem in the center. The other is 1.2 cm in diameter and is plain. The blade is most likely the original because it has been engraved with the same names.
Date: 1895
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum

[Stove flue damper]

Description: Stove flue damper, pat. July 20, 1915. 11.8 cm diameter damper body with three oval holes. Handle is spring coiled. Body is cracked twice--once through "I" in "American" and once after "N" in "American." See 1999.008.014, 1999.008.016 for other examples of same model
Date: July 20, 1915
Item Type: Refine your search to only Physical Object
Partner: Fort Bend Museum
Back to Top of Screen