UNT Libraries Government Documents Department - 32 Matching Results

Search Results

Results: 1 - 24 next

Adjustable Stool.

Description: Patent for an adjustable and foldable stool for but not limited to field workers, including instructions and illustrations.
Date: April 6, 1880
Creator: Smith, William Alexander & Smith, Robert Toumbleson
Item Type: Refine your search to only Patent

Ant Trap.

Description: Patent for a new and improved ant trap. This design consists "[i]n a device for catching ants, the combination, with an open frame, of the end piece or trough, having a concave bottom and overturned edges" (lines 84-87).
Date: March 29, 1887
Creator: Haines, Samuel Alfred
Item Type: Refine your search to only Patent

Ant Trap.

Description: Patent for a new and improved ant trap. This design consists in "the combination of a tube having a longitudinal slot in its top at one end and a transverse slot in the bottom near the other end, the top of the tube on each side of the longitudinal slot bent downward, a pen secured to the end of the tube having the longitudinal slot, a portion of one side piece of the pen forming an end for the tube and the other side piece being cut away and secured to the tube, and a receptacle under the end … more
Date: February 28, 1888
Creator: Miller, Marshall Crittenden
Item Type: Refine your search to only Patent

Calculating Device.

Description: Patent for a new and improved calculator. This design "consists in having a central disk provided on each side with a disk somewhat smaller, the three being pivoted centrally, so that the smaller disks on the sides may be rotated independently of the central disk. The central disk has twelve or more marginal figures on each side, equidistant from each other, and a column of figures extending inwardly from each marginal figure" (lines 19-27).
Date: November 24, 1885
Creator: Tucker, Argyle W.
Item Type: Refine your search to only Patent

Car Coupling.

Description: Patent for a new and improved coupling for railroad cars. This design consists in "[t]he combination, with the draw-head, of an upright or standard secured thereto, a lever pivoted to said upright or standard, a coupling-pin pivoted to said lever, a flat spring secured to the underside of the draw-head and extending outwardly beyond the same, and a chain connecting said lever and spring" (lines 16-22).
Date: October 28, 1884
Creator: Pritchett, William Henry
Item Type: Refine your search to only Patent

Car Coupling.

Description: Patent for a new and improved coupling for railroad cars. This design is of a car-coupling with a bumper having recesses and slots, "having [a] lip and transverse inner wall, the hook pivoted therein, the bumper, the stirrup suspended beneath the bumper, vertical rods or connections, levers pivoted in suitable bearings on the car-roof, locking-plate, and the [additional] levers" (lines 1-6).
Date: February 20, 1883
Creator: Hawkins, William A. & Hawkins, Charlie S.
Item Type: Refine your search to only Patent

Combined Hedge Trimmer and Mower.

Description: Patent for a new and improved hedge trimmer and mower. This design "relates to certain new and useful improvements in that class of combined hedge-trimmers and mowers in which the side and top of a hedge are trimmed at the same time; and it consists in the construction and arrangement of the frame-work, the driving mechanism or gearing, and the cutting devices or knives" (lines 10-17).
Date: February 14, 1882
Creator: Lattner, Jacob V.
Item Type: Refine your search to only Patent

Cultivator.

Description: Patent for a cultivator, a type of farm implement used for secondary tillage, a way of plowing or cultivating of soil, including illustrations.
Date: November 17, 1885
Creator: Brown, Peter C. & Bragg, Thomas P.
Item Type: Refine your search to only Patent

Fruit Gatherer.

Description: Patent for a new and improved fruit gatherer. This design consists "[i]n a fruit-gatherer, the combination of the pole, the jaws attached to its upper end, the sliding collar, the links connecting the collar and the sleeve, the rods, the jaws, the ring, the tube attached thereto and encircling the pole below said jaws, and the sleeve which supports the ring and is adjustable on the pole longitudinally for the purpose of adjusting the mouth of said tube in the desired proximity to the said jaws"… more
Date: September 25, 1888
Creator: Hall, Francis Asbury
Item Type: Refine your search to only Patent

Gas Retort.

Description: Patent for a new and improved gas-retort. This design "is to provide a new and improved retort for generating gas for illuminating or other purposes from stone coal, and being specially adapted to be used on cooking-stoves. The invention consists of a fire-pot fitting onto the eye of a stove, of a spherical retort held to turn on the said fire-pot and made of two parts, and of a gas outlet formed in one of the trunnions of the retort" (lines 7-16).
Date: January 29, 1889
Creator: Jones, Wesley Corry
Item Type: Refine your search to only Patent

Hame Tug.

Description: Patent for a new and improved hame-tug. This design "relates to a hame and trace attachment, having for its object to provide a simple, strong, and durable device to connect the front end of the trace chain or strap to the hame, whereby the movement of the said chain or strap is prevented from wearing the parts, and thus necessitating frequent repair or replacement" (lines 9-16).
Date: September 18, 1888
Creator: Anderson, Charley N. & McPhaill, Robert
Item Type: Refine your search to only Patent

Harvester-Reel.

Description: Patent for the placement of a "covering of canvas, cloth, or other suitable material" (lines 16-17) around a harvester-reel for various improvements, including instructions and illustrations.
Date: March 23, 1880
Creator: Moore, Joseph Martial
Item Type: Refine your search to only Patent

Hay or Cotton Press.

Description: Patent for a new and improved baling press. This design consists "[i]n a hay-press, the combination of the box or casing having suitable doors in its top, bottom, and side, and supported on longitudinal base-strips, a main lever having a short toggle-arm, a semi-rotating fulcrum thereof, auxiliary arms pivotally connected with the main lever, reciprocating followers, and a drum and cord" (lines 26-33).
Date: July 28, 1885
Creator: Bragg, Thomas P.
Item Type: Refine your search to only Patent

Head Frame for Cattle.

Description: Patent for a new and improved head-frame for cattle. This design is "to prevent cattle from breaking down or going through fences" (lines 9-10). To this end, it "compris[es] the bar bearing longitudinally on the face of the animal, bent forward at its upper end to form a hook, and provided with a rearwardly-convex bend near its lower end, the rectangular frame integral with the lower end of the bar, having its sides forwardly convexed . . . and provided with the inwardly-extending arms, the adj… more
Date: October 2, 1888
Creator: Dorris, James Orson
Item Type: Refine your search to only Patent

Lever Scraper for Cleaning Plows.

Description: Patent for a new and improved lever scraper for cleaning plows. This design "relates to improvements in plows, the object being to remove quickly and readily from the mold-board the earth which, in plowing stiff, waxy, or greasy soils, adheres thereto; and it consists in the construction and novel arrangement of a scraper-blade and of the actuating mechanism therefor" (lines 9-15).
Date: November 8, 1887
Creator: Tucker, Argyle W.
Item Type: Refine your search to only Patent

Machine for Packing Cotton.

Description: Patent for a new and improved packer. This design consists "[i]n a cotton-packer, the combination of the frame, guides mounted therein, rack-bars moving in the said guides, a press-box and steam-cylinder, and heads secured to the rack-bars and moving in the press-box and cylinder, respectively, cog-wheels of different diameters journaled in the frame and meshing with the rack-bars, and anti-friction rollers pivoted in the guides and bearing against the rack-bars" (lines 4-13).
Date: May 21, 1889
Creator: Brady, Farley
Item Type: Refine your search to only Patent

Machine for Putting Ties on Bales.

Description: Patent for a new and improved machine for putting ties on bales. This design consists in a "frame-work which is to be placed across the bale . . . a shaft journaled in the frame and provided with a reel at each end, and pawls and ratchets with hooked ropes or chains . . . a double rope which is to be passed around the bale . . . and suitable U-shaped hooks . . . to provide a machine whereby cotton and other bales can be compressed at that point where the tie has come off, so as to allow another… more
Date: May 1, 1888
Creator: Dunbar, William E.
Item Type: Refine your search to only Patent

Mechanical Motor.

Description: Patent for a new and improved motor. This design consists, "with the frame having the side and end slots, of the two drive-wheels and their springs, the movable spring-actuated shaft having the central pinion, the pivoted lever, the catch of the same, the crank-shaft formed with the central crank and having the pinion, the connecting-pitman, the pivoted adjustable fan-rod formed with the series of apertures near its upper end and along its central part, the adjustable weight, and the connecting… more
Date: May 8, 1888
Creator: Haines, Samuel Alfred
Item Type: Refine your search to only Patent

Nut Lock.

Description: Patent for a new and improved nut lock. This design calls for a grooved nut and bolt to hold a pin between the two while the bolt is screwed onto the nut. Depending on whether or not the pin is in said grooves, the nut may or may not be removed from the bolt, which increases the worker's control over the nut and bolt and prevents unintended loosening.
Date: March 1, 1881
Creator: Bunker, John Williamson
Item Type: Refine your search to only Patent

Pruning Implement.

Description: Patent for a new and improved pruner. This design "has relation to that class of pruning elements in which a concave chisel-edge is formed in the upper end of the blade and one concave jaw of a pair of pruning-shears is formed at the lower end of the blade, while a saw is attached to one side of the blade and a pivoted jaw is attached to the lower end, operating together with the lower concave edge, and it contemplates certain improvements upon the pruning implement [of an earlier patent]" (lin… more
Date: August 17, 1886
Creator: Bartly, Robert
Item Type: Refine your search to only Patent

Pruning Implement.

Description: Patent for a new and improved pruning implement. This design consists in "the combination, with a staff, of the jaw-arms pivoted to the staff and provided with the upwardly-projecting and curved jaws, the collars fitted loosely on the staff, the rods connecting the said collars, and the link-arms pivoted to the collar and to the jaw-arms" (lines 11-17).
Date: September 25, 1888
Creator: Hall, Francis Asbury
Item Type: Refine your search to only Patent
Back to Top of Screen