UNT Libraries Government Documents Department - 84 Matching Results

Search Results

Results: 1 - 24 next

Axle Box for Locomotives.

Description: Patent for a new and improved axle-box for locomotives. This design consists in "[t]he combination, with a pedestal, of an axle-box mounted to slide vertically in the said pedestal, a second axle-box mounted with one side in a bearing in the said pedestal, and a connecting-rod secured to the last-named axle-box and pivotally connected with the first-named axle-box" (lines 67-73).
Date: April 2, 1889
Creator: Chase, Ransford T.
Item Type: Refine your search to only Patent

Automatic Water Trap for Cisterns and Other Receptacles.

Description: Patent for a new and improved water-trap. This design consists in "the combination, with a bent main pipe, of a vessel secured on the said main pipe and connected at its top with the interior of the said main pipe, a pin held on the bottom of the said vessel, a fixed sleeve provided with a spiral groove and engaged by said pin, a grooved pin held in the said fixed sleeve and resting at its top end on the bottom of the said pin, a roped connected with the said grooved pin, and a weight held on t… more
Date: August 7, 1888
Creator: Pickering, Charles H.
Item Type: Refine your search to only Patent

Baling Press.

Description: Patent for a new and improved baling-press. This design has for its object "to provide a press in which the material to be baled can be compressed into bales of the desired sizes, and then emptied from the baling-box by tilting up the tail-board, which is provided with angle irons to catch under the bale" (lines 15-20).
Date: August 7, 1888
Creator: Hoop, Friedrich W. J. & Isaac, Joseph
Item Type: Refine your search to only Patent

Axle Lubricator.

Description: Patent for a new and improved axle lubricator. This design "consist[s] of a box provided with bearings in which the axle works, and with a cellar below the said bearings for the reception of the waste for containing the lubricant; [and] . . . of a frame in which the box fits, . . . being provided with screws for elevating or depressing the box, whereby it may be kept always in contact with the axle . . . The object is to produce an axle or journal lubricator . . . [that] will keep the bearings … more
Date: May 21, 1889
Creator: Good, William
Item Type: Refine your search to only Patent

Car Door.

Description: Patent for a new and improved door for railroad cars. This design consists in "[t]he combination, with the car having the door-opening with its upper and lower edges parallel and inclined upward and inward, and the bolt-keeper secured to the sill of the car, of the door having correspondingly-inclined upper and lower edges, the guide-staple and fulcrum-bracket secured to the door at proper points, the operating-lever pivoted to said bracket, the link-rods and bolt, the [other] link-rod pivoted … more
Date: May 28, 1889
Creator: Charlton, James
Item Type: Refine your search to only Patent

Apparatus for Stamping Envelopes

Description: Patent for "a means whereby with one motion a stamp will be supplied from the'apparatus, moistened, and placed in position upon a letter, wrapper, or parcel adapted to receive it, and wherein a number of stamps may be consecutively placed when and as desired" (lines 10-15).
Date: September 24, 1889
Creator: Helland, Hans & Matzow, Frantz
Item Type: Refine your search to only Patent

Automatic Fan

Description: Patent for mechanical improvements in "automatic fans intended especially for use on beds, whether in houses or in sleeping-cars" (lines 7-9).
Date: December 17, 1889
Creator: Comminge, Frank
Item Type: Refine your search to only Patent

Air Compressor for Deep Well Pumps.

Description: Patent for a new and improved air-compressor. This design "relates to improvements in air-compressing mechanism for the purpose of pumping for forcing from deep wells and performing similar work; and it consists in the construction and arrangement of a larger and smaller air-cylinder, and the combination therewith of mechanism to force the air from the larger into the smaller cylinder to increase the air-pressure in the latter" (lines 22-30).
Date: August 2, 1887
Creator: Adams, John R.
Item Type: Refine your search to only Patent

Apparatus for Making Soap.

Description: Patent for a new and improved soap-making machine. This design "consist[s] of grease and soda tanks, the latter tank having a diaphragm . . . a register-tank, pipes leading from said grease and soda tanks to said register-tank, a pivoted converter, a rotary shaft in said converter and blades, a shaft journaled in uprights attached to said converter and provided with a crank and a bevel wheel, the latter gearing with a bevel-wheel on said rotary shaft in the converter, and removable furnaces for… more
Date: September 20, 1887
Creator: Grant, William A.
Item Type: Refine your search to only Patent

Baling Press.

Description: Patent for a new and improved baling press. This design "relates to certain improvements in portable and stationary baling-presses more especially designed for baling hay; and the invention consists in the construction, arrangement, and combination of parts" (lines 6-10).
Date: December 16, 1884
Creator: Hampton, John Andrew
Item Type: Refine your search to only Patent

Bed Clothes Clamp.

Description: Patent for a new and improved clamp. This design consists in "[t]he combination, with a suitable clasp for holding the bed-clothes and its link, of the means for adjustably securing it to the bed-rail, consisting of a rod, having its lower end screw-threaded and provided with a nut and washer, and having on its upper end a hook-shaped projection that is adapted to pass over and around the upper edge of the bed-rail, and is provided with an eye . . . for connection with the clamp" (lines 65-74).
Date: May 26, 1885
Creator: Kiam, Benjamin
Item Type: Refine your search to only Patent

Combined Satchel and Pillow.

Description: Patent for a new and improved combined satchel and pillow. This design consists in "[t]he combination, with a valise or satchel, of an airbag permanently incorporated in the same to form one of the sides thereof, and having a mouthpiece upon the exterior of the valise, whereby the bag may be inflated without opening the valise" (lines 62-67).
Date: August 19, 1884
Creator: Kiam, Benjamin
Item Type: Refine your search to only Patent

Bale Tie.

Description: Patent for a new and improved bale tie. This design "consists of a short thin plate of metal having two tongues . . . fronting each other, said plate being pivoted at one end to the bale-hoop . . . the other end of the bale-hoop being passed under the tongues and drawn tightly around the bale, the expansion of the bale on the hoop causes the respective ends to pull on the respective ends of the tie-plate . . . so as to grip the edges of the end passed between the tongues and hold it firmly" (l… more
Date: July 24, 1883
Creator: Arnold, Abbott
Item Type: Refine your search to only Patent

Spark-Arrester.

Description: Patent for the "construction of a spark-arrester adapted to the smoke-stack of any locomotive" (lines 12-13) detailing a new and better combination and arrangement of plates and screens.
Date: February 10, 1880
Creator: Wiggin, John E.
Item Type: Refine your search to only Patent

Spark-Arrester.

Description: Patent for concepts and designs used to improve performance of Spark-Arresters used in the smoke stacks of locomotives with illustrations and instructions.
Date: April 6, 1880
Creator: Wiggin, John E.
Item Type: Refine your search to only Patent

Car-Coupling.

Description: Patent for "construction and arrangement of arrow-shaped draw-heads and lever-bars adjustable upon rack-bars for the purpose of raising and lowering the draw-heads" (lines 16-20)including instructions and illustrations.
Date: April 20, 1880
Creator: Gray, John D.
Item Type: Refine your search to only Patent

Apparatus for Retailing Shot.

Description: Patent for a new and improved round dispenser. This design "consists in a receptacle or multiple bin the several compartments of which are provided with valves controlling exit-openings, whereby any desired quantity of shot, descending by gravity from the appropriate compartment, may be directed into the scale-pan of a scale without the necessity of lifting the receptacle or bin or any part of its contents" (lines 35-43).
Date: September 21, 1880
Creator: Stokes, Micajah
Item Type: Refine your search to only Patent

Cot.

Description: Patent for a new and improved cot. This design is for a cot that, "[w]hen it is desired to pack the cot for transportation the flexible bottom is first removed from the frame, after which the latter is taken apart and the pieces thereof placed compactly together in a bundle with the flexible bottom. In this cot there are no pivot-joints to become worn or get out of order, and should any of the separable pieces become broken or damaged they can be readily replaced" (lines 47-56).
Date: January 23, 1883
Creator: Martial, Antoine William
Item Type: Refine your search to only Patent

Amalgamator.

Description: Patent for a new and improved amalgamator. This design "consists in placing in the bottoms of the chambers a number of iron balls or other suitable-shaped pieces of amalgamated iron, which have sufficient room to move freely among themselves, and then forcing up through the balls or pieces of iron, in contradistinction to forcing it down over their tops, the amalgamated ore and water, so as to cause the pieces of iron to vibrate, and thus to grind and break the pieces of quartz passing up throu… more
Date: September 12, 1882
Creator: Schmidt, Erich Franz & Streernwitz, William Henry
Item Type: Refine your search to only Patent

Car Coupling.

Description: Patent for a new and improved coupling for railroad cars. This design consists in "[t]he combination . . . of the laterally and vertically movable draw-head having the hook at its outer end, the keeper depending from the lower side of the car, and in which the draw-head is confined, the spring connected to one side of the draw-head and bearing thereon, and the arm pivoted in a slot in the draw-head, and having the head projecting in rear of the lip or shoulder of the hook, and the lever fulcrum… more
Date: July 20, 1886
Creator: Gorny, Jacob
Item Type: Refine your search to only Patent

Box Car Door Fastener and Spark Arrester.

Description: Patent for a new and improved box-car door fastener and spark arrester. This design consists in "the door, the screws extending therefrom, the strips having the inclined slots received on the screws, and provided with the projections, the lever pivoted on the screws outside the strip, stops on the lever to engage the projections, and means--such as cord--for locking the lever" (lines 4-11).
Date: October 19, 1886
Creator: Lynch, Hubbard Calhoun
Item Type: Refine your search to only Patent

Insect-Destroyer.

Description: Patent for "improvement in machines for destroying bugs and worms that infest cotton and other plants" (lines 8-10), including instructions and illustrations.
Date: January 31, 1888
Creator: Webb, Thomas H.
Item Type: Refine your search to only Patent
Back to Top of Screen