UNT Libraries Special Collections - 173 Matching Results
Search Results
- [A Bell employee standing at a work table]
- Photograph of a Bell Helicopter employee standing at a work table in the Bell plant.
- [Bell employee working on a part for the XH-40]
- Photograph of a Bell Helicopter employee working on a part for the XH-40 helicopter.
- [Bell employee working on the nose assembly of the XH-40]
- Photograph of a Bell employee working on the XH-40 nose assembly in the Hurst plant.
- [Bell employees posing in front of an unfinished fuselage of an XH-40]
- Photograph of three Bell employees posing in front of an unfinished XH-40 fuselage in the Bell Helicopter plant.
- [Bell employees standing in a control room]
- Photograph of Bell Helicopter employees working in a control room.
- [Bell employees testing a part for the XH-40]
- Photograph of Bell Helicopter employees testing a part for the XH-40 helicopter.
- [Bell employees testing a part for the XH-40]
- Photograph of Bell Helicopter employees testing a part for the XH-40 helicopter.
- [Bell employees working in a control room]
- Photograph of four Bell Helicopter employees working in a control room.
- [Bell employees working on parts for the XH-40]
- Photograph of two Bell Helicopter employees working on parts for the XH-40 helicopter.
- [Bell employees working on parts for the XH-40]
- Photograph of Bell Helicopter employees working on a part for the XH-40 at a table.
- [Bell employees working on parts for the XH-40]
- Photograph of Bell Helicopter employees working on parts for the XH-40 on the assembly line.
- [Bell employees working on parts for the XH-40]
- Photograph of two Bell Helicopter employees working on a part for the XH-40 helicopter.
- [Bell employees working on parts for the XH-40]
- Photograph of Bell Helicopter employees working on the fuselage for the XH-40 helicopter.
- [Bell employees working on parts for the XH-40]
- Photograph of three Bell Helicopter employees working on parts for the XH-40 helicopter.
- [Bell employees working on parts for the XH-40]
- Photograph of Bell Helicopter employees working on parts for the XH-40 helicopter.
- [Bell employees working on parts for the XH-40]
- Photograph of three Bell Helicopter employees reviewing plans in the construction of parts for the XH-40 helicopter.
- [Bell employees working on parts for the XH-40]
- Photograph of Bell Helicopter employees working on various parts for the XH-40 helicopter in the Bell plant.
- [Bell employees working on parts to the XH-40]
- Photograph of Bell Helicopter employees working on parts for the XH-40.
- [Bell employees working on the fuselage of an XH-40]
- Photograph of Bell employees working on the fuselage of an XH-40 helicopter.
- [Bell employees working on the fuselage of an XH-40]
- Photograph of Bell employees working on the fuselage of an XH-40 helicopter.
- [Bell employees working on the fuselage of an XH-40]
- Photograph of Bell Helicopter employees working on the fuselage of an XH-40 in the Bell plant.
- [Bell employees working on the fuselage of an XH-40]
- Photograph of Bell employees working on the fuselage of an XH-40 helicopter.
- [Bell employees working on the fuselage of an XH-40]
- Photograph of Bell employees working on the fuselage of an XH-40 helicopter.
- [Bell employees working on the whirl test for the XH-40]
- Photograph of two Bell employees working on the whirl test for the XH-40.
- [Bell employees working on the XH-40]
- Photograph of Bell Helicopter employees working on the XH-40.
- [Bell employees working on the XH-40 blade on the assembly line]
- Photograph of Bell Helicopter employees constructing the blade for the XH-40 helicopter on the assembly line.
- [Employees sitting in front of the XH-40 in progress]
- Photograph of Bell employees working on the XH-40.
- [A Lycoming engine being tested]
- Photograph of a Lycoming engine being tested before installation into the XH-40 #1 helicopter.
- [A Lycoming engine being tested]
- Photograph of a Lycoming engine being tested before installation into the XH-40 #1 helicopter.
- [A Lycoming engine being tested]
- Photograph of a Lycoming engine being tested before installation into the XH-40 #1 helicopter.
- [The Lycoming turbine engine before installation in the XH-40 #1]
- Photograph of the Lycoming turbine engine before installation in the XH-40.
- [The Lycoming turbine engine being hoisted to the top of XH-40 #1]
- Photograph of the Lycoming turbine engine being hoisted up to the top of the XH-40 #1.
- [The Lycoming turbine engine being hoisted to the top of XH-40 #1]
- Photograph of the Lycoming turbine engine being hoisted up to the top of the XH-40 #1.
- [The Lycoming turbine engine being hoisted to the top of XH-40 #1]
- Photograph of the Lycoming turbine engine being hoisted up to the top of the XH-40 #1.
- [The Lycoming turbine engine being hoisted to the top of XH-40 #1]
- Photograph of the Lycoming turbine engine being hoisted up to the top of the XH-40 #1.
- [The Lycoming turbine engine being hoisted to the top of XH-40 #1]
- Photograph of the Lycoming turbine engine being hoisted up to the top of the XH-40 #1.
- [The Lycoming turbine engine being hoisted to the top of XH-40 #1]
- Photograph of the Lycoming turbine engine being hoisted up to the top of the XH-40 #1.
- [Lycoming turbine engine ship #1 of the XH-40]
- Photograph of the XH-40 Lycoming turbine engine ship #1.
- [Lycoming YT53-L-1 turbine engine]
- Photograph of a Lycoming YT53-L-1 turbine engine being hoisted into the first Bell XH-40 helicopter
- [Lycoming YT53-L-1 turbine engine]
- Photograph of a Lycoming YT53-L-1 turbine engine being hoisted into the first Bell XH-40 helicopter.
- [Main rotor hub and blade assembly of the XH-40]
- Photograph of the XH-40 main rotor hub and blade assembly mounted in a fatigue test shack.
- [Main rotor hub and blade assembly of the XH-40]
- Photograph of the XH-40 main rotor hub and blade assembly mounted in a fatigue test shack.
- [Main rotor hub assembly of the XH-40]
- Photograph of the main rotor hub assembly for the XH-40 on a table below the blueprint for the part.
- [News Clip: A. B. A. President]
- Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany a news story about E. Smythe Gambrell, president of the American Bar Association, speaking about his tour of the Soviet Union.
- [News Clip: Alger]
- Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany a news story about the Democratic National Convention and a county Republican convention in Dallas, Texas.
- [News Clip: Banker Fails to Identify Robbery Suspects ; Hijacker ; TV Performer to Tour Texas Cities ; Bonehads]
- Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany four news stories. The first is about a banker who was robbed by two men. The robbers took the banker's money and $254 in change from his bank. The banker is unable to identify the men in a police lineup. After that is a story about John R. Walker, a man who was arrested for the theft of $103 and a car. The third is about Pinky Lee visiting Fort Worth and Dallas following his collapse during a television program. The final story is about the Dallas Bonehead Club making humorous suggestions regarding Dallas' fouled water.
- [News Clip: Clown and Trained Dogs Launch Tour]
- Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany a news story about Richo the Clown and his trained dogs on a tour to promote a frozen food company.
- [News Clip: Coaches]
- Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany a news story about Fort Worth high school football coaches meeting before the season begins.
- [News Clip: Constitution Party Names Candidates]
- Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany a news story about the Constitution Party's national convention, ending in the nomination of T. Coleman Andrews as its presidential candidate.
- [News Clip: Constitution Party Opens Convention]
- Video footage from the WBAP-TV station in Fort Worth, Texas, to accompany a news story about the Constitution Party holding its convention at Hotel Texas.