Patent for a new and improved churn. This design consists in "[t]he combination of the standards, the longitudinal bars connecting the same, the driving-shaft journaled on the upper bars, the counter-shaft journaled on the lower bars and provided with a crank-disk at one end, gearing between the driving-shaft and the counter-shaft, the balance-wheel on the counter-shaft, the rock-shaft journaled on the upper bars and provided with the oppositely-extending crank-arms between the said bars, the crank arm depending from the end of the rock-shaft, [and] the pitman" (lines 88-99).
Patent for a new and improved animal trap. This design consists in "the combination of the base-board having the opposite recesses and the transverse shaft, the yoke having the spring-coils mounted on the projecting ends of the shaft in said recesses, the standard having the holding-rod, the trigger, and the guards or prongs secured in the base-board" (lines 20-26).
Patent for a new and improved dishwasher. This design consists in "[t]he combination, with a pan provided near its top on the inner side with rigidly-attached brackets, with a tray in the form of a pan whose side and bottom portions are perforated . . . the tray being of less diameter and height than the pan and provided on its outer side near the bottom with brackets and on its upper edge with handles" (lines 94-101).
Patent for a new and improved clasp. This design "compris[es] a base and a reversely bent or inclined retaining or clamping arm formed of a single continuous wire with an eye at one end thereof and a bend or enlargement at the other end thereof, the frame or base being substantially rectangular, and the upward bent arm extending through the eye at one end of the base and having the bend or enlargement at the other end arranged near or against the end bar at the opposite end of the frame" (lines 66-76).
Patent for a new and improved wagon jack. This design consists "[i]n a wagon body raiser, the combination of vertical supports, a lever pivotally supported therefrom between its ends and having a roller in one end, a shaft adapted to be secured to one end of the body, a cord having one end connected with the same end of the body as the shaft and passing over the roller and its opposite end attached to the shaft, and a cord attached to the opposite end of the body and to the adjacent end of the lever" (lines 69-78).
Patent for "a medical compound or liniment for the alleviation and cure of wounds, especially those occasioned by barb-wire fences, burns, bruises, sprains, rheumatism, frost-bites, and hemorrhoids on man or beast" (lines 11-15).
Patent for a new and improved ironing board. This design consists, "with the supporting-frame and hinged board, of the inclined bar pivoted to the under side of said board, the lever hinged at one end to the lower end of the bar and fulcrumed . . . to the under side of the cross-bar, and the treadle hinged to one bottom rail and passing under the other" (lines 75-82).
Patent for "an improvement in portable folding poultry-coops, and more particularly to a'coop or crate used in the transportation of fowls to market by rail or boat" (lines 8-11)
Patent for an improvement on stock cars to "enable the weight of the water-laden troughs to be overcome and the troughs elevated in position simultaneously through the entire length of the car; second, to regulate the movement of the water-troughs" (lines 16-20).
Patent for new container for holding and dispensing gunpowder with illustrations consisting of "glass vessel incased within a metallic jacket and having an exteriorly-screw-threaded neck, in combination with a cap or cover" (page 2, lines 1-3) to increase safety and prevent corrosion of vessel.
Patent for a new and improved sweeping machine. This design consists, "with the frame mounted upon supporting-wheels at its front and rear ends and having the rotating rear axle, of the vertically-adjustable revolving brush receiving motion from the said axle, and a dust pan or receptacle having laterally extending pins or plugs, whereby it is supported detachably upon the frame of the machine in front of the revolving brush" (lines 13-21).
Patent for "an adjustable, folding, and removable attachment that can be adjusted to various heights, one that can be easily attached to and detached from the bedstead, and one that when so detached can be neatly folded into a compact mass,which will occupy very little space" with an adjustable guard (lines 11-19).
Patent for a new and improved plow. This design consists in "the combination of the beam having the downwardly and forwardly extending standard and foot, the seat-plate secured to the foot and having perforations, the arm or bracket extending laterally from the standard, and the share bolted to the seat-plate and having the landside and the moldboard bolted to the plate and arm and resting upon said plate and arm and upon the upper edges of the mold-board and landside" (lines 64-74).
This dialog allows you to filter your current search.
Each of the Months listed note their name and the number of records that will be limited down to if you choose that option.
The list can be sorted by name or the count.
This dialog allows you to filter your current search.
Each of the Days listed note their name and the number of records that will be limited down to if you choose that option.
The list can be sorted by name or the count.