Texas Patents - 20 Matching Results

Search Results

Car-Coupling.

Description: Patent for a car-coupling that has a draw head with a link opening, a pin opening that goes across the link opening and has two side recesses, a sliding head in the link opening, a spring that holds the sliding head in place, two lever arms in the side recesses, a catch block that the lever arms move, and an apparatus for raising the coupling pin.
Date: January 1, 1895
Creator: Shwadlenak, August Frank
Partner: UNT Libraries Government Documents Department

Checkrein-Holder.

Description: Patent for a checkrein-holder for harness-saddles that has a hook grooved on one side, a plate or wire inside the groove that attaches the hook to a smaller hook, a link that engages one end of the hook and as connected to a bell-crank lever, the bell crank lever that locks the link into the hook, and a screw bolt for the bell-crank lever.
Date: January 1, 1895
Creator: Winans, Myron L.
Partner: UNT Libraries Government Documents Department

Clock-Level.

Description: Patent for a clock level that is made up of a wall-plate that is attached to the wall, arm braces that are attached to the wall-plate, thumb-screws in the lower shelf-plate, a shelf-plate, levels, plates secured to the edge of the shelf, and leveling nibs.
Date: January 8, 1895
Creator: Marshall, William J.
Partner: UNT Libraries Government Documents Department

Car-Coupling.

Description: Patent for a simple, practical, and reliable car-coupling with a side latch. It is "adapted for automatic connection in pairs, when two cars having the improvements are brought together on the same track, which will be capable of a ready release from the side of either coupled car, and also that will be adapted by its peculiar formation to receive support from one part of the improvements, when a coupled drawhead is partly detached from its connections to the car, and which if not so sustained … more
Date: January 15, 1895
Creator: Curry, Charles D.
Partner: UNT Libraries Government Documents Department

Wire-Tightener.

Description: Patent for a wire-tightener that stretches "the wire after it has been secured to the post, and to take up any slack which may exist therein, owing to causes arising subsequent to the first stretching of the wires" (lines 10-13). It has similar features of other wire-tightener but is simple and efficient.
Date: January 1, 1895
Creator: Glenn, John William
Partner: UNT Libraries Government Documents Department

Vehicle-Wheel.

Description: Patent for "novel and inexpensive means whereby vehicle wheels may be protected from the many accidents occurring by reason of the irregularities and crevices in the path of travel; a still further object being to construct a safety guard that will be strong, durable, and add but little weight to the wheel." (Lines 17-23) Includes instructions and illustrations.
Date: January 8, 1895
Creator: Laube, Godfried
Partner: UNT Libraries Government Documents Department

Lantern.

Description: Patent for a lantern that has an "exceedingly cheap construction, that is designed for use in high winds, as well as for domestic use, and which may be employed in connection with the ordinary oil and wick or candle" (lines 10-14).
Date: January 8, 1895
Creator: Seys, Cornelius D.
Partner: UNT Libraries Government Documents Department

Valve-Motion.

Description: Patent for "a variable cut-off valve-motion, and has for its object to provide simple and efficient and at the same time readily adjustable means for varying the points at which the ports communicating with the cylinder of a locomotive or other engine are opened and closed, in accordance with the load, the desired speed, &c." (Lines 8-15) Includes instructions and illustrations.
Date: January 1, 1895
Creator: Shelb, Peter J.
Partner: UNT Libraries Government Documents Department

Thill-Tug.

Description: Patent for a simple thill-tug that can be easily connected and disconnected, and is strong and durable. It does not use spring latches, and the device attaches to the harness.
Date: January 29, 1895
Creator: Carton, William
Partner: UNT Libraries Government Documents Department

Printing-Machine.

Description: Patent for "a self-feeding and self-delivering printing machine which prints sheets and not webs." (Lines 8-10) Includes instructions and illustrations.
Date: January 8, 1895
Creator: Clarke, George R.
Partner: UNT Libraries Government Documents Department

Paint Compound.

Description: Patent for "a fire and water-proof coating material adapted for application to wood and metallic roofing, boats, &c., to preserve the material from corrosion and render the same impervious to water." (Lines 9-13) Includes instructions and illustrations.
Date: January 1, 1895
Creator: Rook, Benjamin F.
Partner: UNT Libraries Government Documents Department

Surgical Instrument.

Description: Patent for a surgical instrument meant to help examine and treat the urethra and similar internal canals and passages. It can easily be cleaned and taken apart.
Date: January 15, 1895
Creator: Johnson, Emmet E.
Partner: UNT Libraries Government Documents Department

Governor for Steam-Engines.

Description: Patent for a governor for steam-engines that provides "an automatic governing device controlled by the speed, and hence, by the load of the engine, in order to maintain uniformity of movement under variations of load" (lines 10-14).
Date: January 15, 1895
Creator: Johnson, Billie
Partner: UNT Libraries Government Documents Department

Portable Dental Chair.

Description: Patent for a simple portable dental chair meant for traveling dentists. It adjusts easily and folds compactly.
Date: January 15, 1895
Creator: Lovejoy, Edward Harrison
Partner: UNT Libraries Government Documents Department

Cotton-Press.

Description: Patent for an "apparatus adapted for continuously compressing and baling cotton in juxtaposition to the ginning machinery, by conducting cotton from the condenser to compressing rolls operating to progressively compress the fluffy mass into a compact bat or sheet which is laid in folds or laps and subsequently moved or transferred to a suitable baling press and subjected to final pressure to expel the air from between the folds or laps and enable the bale or package to be tied while under press… more
Date: January 8, 1895
Creator: Murray, Stephen D.
Partner: UNT Libraries Government Documents Department

Cotton-Press.

Description: Patent for a cotton-press that makes "tightly wound bales from the cotton bats formed upon the condenser, and fed into the press" (lines 13-15).
Date: January 22, 1895
Creator: Banister, Charles
Partner: UNT Libraries Government Documents Department

Cotton-Press.

Description: Patent for a cotton-press that does not allow the cotton to rebound after the plunger compresses it because of teeth in the box. When the operator wishes to remove the cotton, the teeth automatically disengage in order for the cotton to be removed easily.
Date: January 22, 1895
Creator: Banister, Charles & Hollingsworth, Joseph
Partner: UNT Libraries Government Documents Department

Baling-Machine.

Description: Patent for a "cotton bale provided with a fire-proof covering in the form of a box or casing of sheet metal, and to have the same so applied to the bale in the process of compressing the cotton in forming the bale, that the said covering will of itself form the entire means for holding the bale intact and in its tightly compressed condition, while serving its additional function as a shipping case which will protect the bale of cotton from fire, and from all possible damage incidental to transp… more
Date: January 29, 1895
Creator: Hutches, Benjamin F., Jr.
Partner: UNT Libraries Government Documents Department

Safety-Guard for Cars.

Description: Patent for a safety-guard for cars that use a flexible netting in front of the car and has a double frame for support. It folds compactly when not in use.
Date: January 29, 1895
Creator: Champlin, William B., Jr.
Partner: UNT Libraries Government Documents Department

Cistern.

Description: Patent for an upright cylindrical cistern made from sheet-metal. This patent "consists in the application to and around the upper open end of the cistern and also if desired at different places around the body of the cistern, of a strengthening ring made of either wrought iron or steel or other suitable metal tubing or piping, to stiffen the cylindrical cistern, said piping or tubing being suitably fastened to the cistern and being arranged around the outside or inside of the same, but preferab… more
Date: January 22, 1895
Creator: Schaefer, Henry P.
Partner: UNT Libraries Government Documents Department
Back to Top of Screen