Texas Patents - 233 Matching Results
Search Results
- Acetylene-Gas Generator.
- Patent for a new and improved acetylene gas generator, including instructions and illustrations.
- Acetylene-Gas Generator
- Patent for an acetylene-gas generator which automatically feeds carbid to the generator and in which the gas generated is washed within the bell.
- Adjustable Grate Attachment.
- Patent for an adjustable grate attachment that is meant to be used with open grates. It prevents "the falling of heated coals therefrom; also to provide for extension of the grate vertically to facilitate making of a larger fire; and further, to provide an attachment which may be used in regulating the draft to the grate proper" (lines 15-20).
- Adjusting and Locking Device for Skid Chains.
- Patent for anti-skid chains for use on automobile wheels and tires which may be locked to prevent slipping.
- Agricultural Implement.
- Patent for "agricultural implements to be used for tilling the soil and planting, either separately or at one and the same operation, and has for its object to reduce the expense incurred by the general practice of first preparing the land for planting and subsequently sowing the seed. By this inventions the land can simultaneously prepared and the grain deposited therein." (Lines 8-17) Includes instructions and illustrations.
- Andiron
- Patent for improvements to andiron or "fire-dogs".
- Andiron.
- Patent for improvement of andirons, to accommodate fuel or sticks of wood and to burn either wood or coal fuel. Includes illustrations.
- Apparatus for Burning Lime.
- Patent for improvements in apparatus for burning lime. To provide reliable and efficient means to extract all the heat units from fuel to be used by providing an increase draft and long blaze.
- Apparatus for Elevating and Cleaning Seed Cotton
- Patent for an apparatus for elevating and cleaning seed cotton
- Attachment for Chairs.
- Patent for a new and improved chair. This design consists "[i]n a reading and writing attachment for chairs, the combination of a bail-shaped clamp adapted to be applied to a chair-arm, an upright slotted arm, a set-screw passing through said slotted arm and engaging the clamp, a plate carried by the upper end of said slotted arm, and a table pivotally connected to said plate, whereby the table may be adjusted vertically, horizontally, and obliquely" (lines 66-75).
- Attachment for Cream-Separators.
- A patent for a strainer rack attachment "which is cheap and simple in construction, which may be very readily attached to the milk bowl supporting stand, and by means of which a strainer may be arranged over the milk bowl or turned back out of the way as desired." (lines 22-27)
- Attachment for Cultivators.
- Patent for a cotton-chopper attachment for cultivators. It can fit to any cultivator with some modification. It is a wheel that rides "upon the row and presses down into the ground parts of the cotton in the row, leaving the other standing, and of the necessary mechanism for attaching and controlling said wheel" (lines 20-24).
- Attachment for Cultivators
- Patent for attachment for cultivators. The invention allows a cultivator's shovel to be spaced apart to facilitate the plowing of corn, cotton, and other similar products.
- Attachment for Cultivators &c
- Patent for a stalk cutter attachment for cultivators.
- Attachment for Motive-Power Machines
- Patent for an attachment for motors "designed to prevent the loss of leverage and power which ordinarily obtains in such motors and in all machinery where the power is taken from cranks, and also to overcome what is known as the dead-center, and thus to greatly increase the power of the machine to which the attachment is applied" (lines 12-18).
- Attachment For Plows And Cultivators.
- Patent for certain new and useful improvements for plows and cultivators, including instructions and illustrations.
- Attachment for Wheel-Cultivators
- Patent for a new and useful improvement in attachments for wheel cultivators, including description and illustrations.
- Automatic Binder Attachment for Hay Presses
- Patent for automatic binder attachment for hay presses with accompanying illustrations of the patent.
- Automobile Attachment
- Patent for an automobile attachment designed to utilize the power produced by motorized engines for various farming implements.
- Baling-Press
- Patent for a baling press used for baling hay and straw. Illustrations included.
- Baling-Press.
- Patent for a new and useful baling press, including instructions and illustrations.
- Baling-Press.
- Patent for a baling press for hay that is meant "to provide a press and suitable power for operating the same, and to so construct said press as to double the capacity of the ordinary pres, that is to form two bales at one time, the press being operated by the same power; and, furthermore, to provide means for conveniently transporting the same when desired" (lines 10-17).
- Baling-Press.
- Patent for a baling-press that means "to provide a simple and efficient power for operating the plunger so constructed as to allow independent return movement of the plunger to avoid loss of time in the operation of the device" (lines 9-13).
- Baling-Press.
- Patent for a baling press intended to work with hay, cotton and similar material, and form bales of many different sizes.
- Band Cutter
- Patent for a band cutter. This invention is designed to cut bale-ties on cotton bales. Illustration included.
- Band-Cutter
- Patent for band-cutters “designed for facilitating the cutting of bale-bands” (lines 11-12) including illustrations.
- Barrel Truck.
- Patent for a new and improved barrel cart. This design "is to provide an improved barrel rack or truck which can be conveniently and easily loaded and transported from place to place; to provide means for assisting in loading the barrel or receptacle on the truck and for retaining the same on the truck against danger of accidental displacement while the truck and its contents are being moved or transported, and to provide an improved truck which shall be very simple, strong, and durable in construction, thoroughly effective in operation, and cheap and inexpensive of manufacture" (lines 14-26).
- Bed-Brace.
- Patent for a bed brace that consists of end-loops that are held by engage hooks at the ends of the bedstead, fixed draw-wires that connect the outer and inner sides of the end-loops, a tension-loop that is connected to the side rails, tightening link with duplicate rings that slide onto the tension loop, and a transverse twisting-bar.
- Bicycle.
- Patent for a bicycle that can be operated by the operator's hands or feet or both, and the motion used to operate the bicycle is that of rowing. "the rider must assume a position upon the machine corresponding to that assumed by an oarsman in a boat, and as the rider can work with both hands and feet all the energy and strength he is capable of exerting can be brought to bear upon the propelling mechanism in a most effective manner, and the seat can be rendered much more comfortable than at present and in no wise interfere with the rider's movements" (lines 18-27).
- Burglar-Alarm
- Patent for improvements in burglar alarms, with horns and sirens.
- Cabinet-Bed
- Patent for "a cheap and simple construction of bed of this class, adapted to be readily folded or unfolded and to provide means for automatically folding and unfolding the legs for supporting the foot of the bed-frame when said frame is raised or lowered" (lines 9-15)
- Car Coupling.
- Patent for a new and improved coupling for railroad cars. This design "has for its object to provide a device of this character which shall be cheap and simple in its construction and thoroughly effective in its operation. The invention consists in the improved construction and combinations of parts" (lines 10-15).
- Car-Coupling.
- Patent for improvement in car-coupler particularly to that known as “swing-pin.” This is how it works “a pin comprises a pin proper whose upper end is connected by a chain with the front end of the arm on a horizontal rod. The body of this pin passes through a catch, from which it may be removed.” (Lines 40-45) “The catch has a transverse pin and a rounded upper edge, terminating in a shoulder at its front end and a tongue at its rear end.” (Lines 46-49) Illustration is included.
- Car Coupling
- Patent for a new coupling mechanism that will automatically couple railway cars together without human assistance.
- Car-Coupling
- Patent for a car-coupling that "will greatly simplify the construction and facilitate the operation thereof by providing levers upon the end of the car" (lines 14-17); including illustration and instructions
- Car Coupling.
- Patent for a new and improved coupling for railroad cars. This design "is to provide means for raising the catch to release it from either side or from the top of the car, and holding it in such raised position" (lines 8-12). It consists, "with the draw-head and the catch pivoted therein and having tip extended vertically through the front end thereof, of eyes in said draw-head, a wire frame journaled in said eyes and having forwardly extending arms above and beneath the body of said catch, and means . . . for turning the frame in said eyes" (lines 85-93).
- Car-Replacer.
- Patent for a repairable, sectional car replacer, including instructions and illustrations.
- Chuck for Coiling Stud-Spirals
- Patent for a specially designed tool "to provide an improved chuck for jewelers' use and for coiling stud-spirals and the like" (lines 9-11).
- Churn
- Patent for a vertical dash butter churn with a frame that allows for removal of the receptacle with dash parts still attached to the frame, including illustrations.
- Churn.
- Patent for a churn with a better support device than previous churns.
- Churn.
- Patent for a churn in which a can has an opening in the center of its lid, in which a dasher-staff fits. The can fits in a frame. There are two parts to the frame, the part that rotates the can, and the part that holds the churn in place. The frame also holds the dasher-staff and a crank to rotate the can's frame.
- Churn.
- Patent for a new and improved churn. This design consists in "the staff-head having the slot . . . and opposite inside grooves, in combination with a dasher-stem head conforming to the recesses in the head and carrying a spring in an upper cavity thereof, a plunger having its toe resting upon said spring, and operative mechanism" (lines 77-83).
- Clamp
- Patent for a clamp. This invention is used for pump-rods, well-tubes, and like implements. Illustration included.
- Clothes Drier
- Patent for a clothes drier. Illustration included.
- Clothes Pounder
- Patent for a new and useful improvements in clothes pounders, including instructions and illustrations.
- Collyrium.
- Patent for a mixture for an eye-water; ingredients, proportions of the ingredients and instructions on how to prepare the mixture are included. No illustration.
- Combination-Tool.
- Patent for a new and useful combination tool, including instructions and illustrations.
- Combined Corn and Cotton Planter
- Patent for an adapter to be added to corn and cotton planters to convert them from one to the other while still being fully functional.
- Combined Cultivator and Cotton-Chopper.
- Patent for a combined cultivator and cotton-chopper, to "provide an improved cotton-chopping mechanism which is adapted to be combined with and operated in connection with a sulky-cultivator, whereby a growing crop of cotton may be plowed and chopped or hoed simultaneously" (lines 15-20).
- Combined Rule and Square.
- Patent for new and useful Improvements in Combined Rules and Squares which makes it "possible to form a rigid straight rule or one or more rigid squares" (lines 24-25), including illustration and instructions.